Additional Safety Rules - Makita 7104L Instruction Manual

ADDITIONAL SAFETY RULES
1 .
Use
this tool only t o cut holes in wood.
2. This tool is for cutting holes in flat-surfaced wood. Never u s e it for cutting
3. Wear ear protectors.
4. Handle the cutter chain carefully; it is very sharp.
5. Place the workpiece on wood blocks or short beams t o prevent the cutter
chain from hitting the ground, floor, etc., causing damage t o the cutter chain
at the time of hole breakthrough.
6. Check the cutter chain carefully for cracks
or
damage before operation.
Replace cracked
or
damaged cutter chain immediately.
7 . Secure the tool to the workpiece firmly.
8. Inspect for and remove nails or foreign matter from the workpiece before
9. Do not operate the tool with the safety cover open.
holes in a log.
operation.
IO. Do not wear gloves during operation.
1 1 . Keep hands away from moving parts.
12. Remove the tool from the workpiece after operation to keep
it
from falling
13. Don't abuse cord. Never yank cord t o disconnect it from the receptacle. Keep
SAVE THESE INSTRUCTIONS.
off and possibly causing injury.
cord away from heat, oil, water and sharp edges.
4