Makita 7104L Instruction Manual
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Chain Mortisers
  5. 7104L
  6. Instruction manual
Makita 7104L Instruction Manual

Makita 7104L Instruction Manual

Hide thumbs Also See for 7104L:
Table of Contents

Advertisement

Quick Links

Download this manual
Chain Mortiser
MODEL 7104L
006289
I N S T R U C T I O N
M A N U A L
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Advertisement

Table of Contents
loading

Related Manuals for Makita 7104L

Summary of Contents for Makita 7104L

  • Page 1 Chain Mortiser MODEL 7104L 006289 I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

  • Page 2: Specifications

    Responsible manufacturer: ator from electric shock. Use only three-wire extension cords which have three-prong grounding-type plugs and Makita Corporation Anjo Aichi Japan three-pole receptacles which accept the tool’s plug.

  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. For safe operations: tion and changing accessories.

  • Page 4: Additional Safety Rules

    ADDITIONAL SAFETY RULES ENB093-1 Use this tool only to cut holes in wood. Do not operate the tool with the safety cover open. This tool is for cutting holes in flat-sur- faced wood. Never use it for cutting holes Do not wear gloves during operation. in a log.

  • Page 5: Functional Description

    FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and unplugged before adjusting or checking function on the tool. Adjusting depth of cut 005999 Loosen the wing bolt on the stopper. Move the stopper to the desired position and tighten the wing bolt.
  • Page 6 Orient the cutters in the direction of the arrow on the tool (rotational direction). 006291 Attach the cutter chain to the sprocket first and then to the chain bar. Semi- tighten the hex bolt. 1. Arrow 2. Sprocket 3. Hex bolt Turn the adjusting screw to increase the tension on the cutter chain.

  • Page 7: Operation

    Turn the setting handle until the front edge of the yellow indicator plate is 006006 aligned with the cutting line (B). 1. Indicator plate 2. Indication plate 3. Cutting line (A) 4. Cutting line (B) OPERATION Grasp firmly the grips on either side. Switch on the tool and wait until the cutter 006007 chain attains full speed.
  • Page 8 Longitudinal (length) enlargement Hole length can be determined in three steps shown in the table below. C00239 Cutter chain position Hole length to be cut Original position 52.5 mm No.1 set position 52.5 mm - 105 mm No.2 set position 77.5 mm - 130 mm NOTE: •...

  • Page 9: Maintenance

    After use, remove dirt, chips and foreign matter adhering to the tool. Then oil the moving parts (especially cutter chain) and the contact portions. To maintain product SAFETY and RELIABILITY, repairs, any other mainte- nance or adjustment should be performed by Makita Authorized Service Cent- ers, always using Makita replacement parts.
  • Page 10 CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 11 Memo...
  • Page 12 Makita Corporation Anjo, Aichi, Japan 883685A221...

Table of Contents