Makita 7104L Instruction Manual
Hide thumbs
Also See for 7104L:
- Instruction manual (52 pages) ,
- Instuction manual (25 pages) ,
- Technical information (8 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita 7104L
Summary of Contents for Makita 7104L
- Page 1 INSTRUCTION MANUAL Chain Mortiser 7104L 006289 IMPORTANT: Read Before Using.
-
Page 2: Specifications
ENGLISH (Original instructions) SPECIFICATIONS Model 7104L Max. hole length (Longitudinal) 130 mm Capacities Max. hole depth 155 mm Width of applicable workpiece 80 mm - 308 mm Chain speed 300 m / min Dimensions (L × W × H) 512 mm × 298 mm × 513 mm Net weight 17.3 kg... -
Page 3: General Power Tool Safety Warnings
Do not use any Makita Corporation responsible adapter plugs with earthed (grounded) power manufacturer declare that the following Makita tools. Unmodified plugs and matching outlets will machine(s): reduce risk of electric shock. Designation of Machine:... -
Page 4: Additional Safety Rules
ENB093-1 of the power tool in unexpected situations. 16. Dress properly. Do not wear loose clothing or ADDITIONAL SAFETY RULES jewellery. Keep your hair, clothing, and gloves Use this tool only to cut holes in wood. away from moving parts. Loose clothes, This tool is for cutting holes in flat-surfaced jewellery or long hair can be caught in moving wood. -
Page 5: Functional Description
Installing or removing cutter chain FUNCTIONAL DESCRIPTION 1. Adjusting screw CAUTION: 2. Chain bar Always be sure that the tool is switched off and 3. Chain cover • 4. Hex bolt unplugged before adjusting or checking function on the tool. Adjusting depth of cut 1. -
Page 6: Operation
release the hook and lower the tool head to cut in the Securing tool to workpiece workpiece. Do not apply excessive pressure to the tool. This may not only decrease the working efficiency but 1. Lever (A) also cause a dangerous reaction. Feed slowly at the 2. - Page 7 When cutting a hole, first use the perpendicular position, NOTE: then No.1 set position and finally No.2 set position. The gauge plate is factory adjusted for cutting a • Always safely hook the tool head back onto the hook hole 30 mm wide. when changing the cutter chain position.
-
Page 8: Maintenance
If you need any assistance for more details regarding Replacing carbon brushes these accessories, ask your local Makita Service Center. Cutter chain • 1. Limit mark Chain bar for 30 mm •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 883685B221...