Setting Inverter Parameters Via We Mate App; Setting Parameters Of Single Inverter; Setting Parameters Of Parallel System - GE GEH User Manual

08 System Commissioning
8�2 Setting Inverter Parameters via WE Mate App
Please set the inverter parameters first via WE Mate app to ensure its normal operation.
WE Mate App is one smart phone application used to communicate with the inverter via bluetooth,
WiFi, 4G or GPRS modules. Commonly used functions:
1. Check the operating data, software version, alarms, etc.
2. Set grid parameters, communication parameters, safety countries, power limitation, etc.
3. Equipment maintenance.
4. Upgrade software version.
For more details, refer to WE Mate User Manual. Scan the QR code or visit
gesolarinverter.com/images/FILES/DOWNLOADS/1-GLOBAL/4-USER-MANUALS/WeMate%20
APP%20User%20Manual-EN.pdf
8�2�1 Setting Parameters of Single Inverter
When setting parameters for a single inverter, please refer to the WE Mate App User Manual.
8�2�2 Setting Parameters of Parallel System
• If you need to use a parallel system, please first check the inverter firmware version through the
WE Mate app to ensure that the firmware versions of all inverters are consistent, and the control
version is higher than 07 and the transmission version is higher than 08. If the firmware version
does not meet the requirements, please contact manufacturer to upgrade the software version.
• When setting the parameters of the parallel system, all inverters need to be connected to the WE
Mate app respectively to complete the single configuration.
• When setting the parallel system parameters, please ensure that the working mode of each
inverter is consistent.
to get the user manual.
WE Mate App
NOTICE
WE Mate User Manual
NOTICE
52
User Manual V1.0-2023-10-30
https://www.