Working In Manual Mode - AEG AMLLGN Original Instructions Manual

WORKING IN MANUAL MODE

In manual mode, the product's self-leveling mechanism is disabled and the laser lines can
be set at any slope required.
1
Place the product on a solid,
flat, vibration-free surface or on
a tripod.
2
Press the manual mode button
(do not slide the locking switch!).
The red LED next to it will light
up.
3
Same as in the self-leveling
mode, the product will
generate three laser beams,
but the laser beams are
interrupted every 3 seconds.
3 sec. 3 sec.
14
ENGLISH
For sign-off review, sent 4 Aug 2023.
3 sec.
14