Working In Manual Mode - AEG CLG220 Original Instructions Manual

WORKING IN MANUAL MODE

WORKING IN MANUAL MODE
In manual mode the cross lasers self-leveling mechanism is disabled and the laser lines can
be set at any slope required.
1
Place the cross laser on a solid
 at vibration free surface or on a
tripod.
2
Long press the I/O button (do
not slide the locking switch!).
The operation LED indicator will
light up.
3
Same as in the self-leveling
mode, the cross laser will
generate 2 laser beams, but the
laser beams are interrupted
every 3 seconds.
3 sec. 3 sec.
ENGLISH
11
3 sec.