Table of Contents
Advertisement
WARNING:
Avoid direct eye exposure. The laser beam can cause severe eye damage and/or blindness.
Do not stare into the laser beam or direct it towards other people.
Caution! The laser-emitting product may be behind you while you are working on other projects. Be careful
when facing the product.
WARNING:
Do not operate the product around children or allow children to operate the product.
Do not point the laser at reflective surfaces. Reflective surfaces could reflect the beam back at the operator
or other persons.
WARNING: The use of controls, adjustments, or the performance of procedures other than those specified in
this manual may result in hazardous radiation exposure.
When the laser is brought into a warm environment from very cold conditions, or vice versa, allow it to come
to the surrounding temperature before use.
Always store the product indoors and avoid substantial knocks, continuous vibration, or extreme
temperatures.
Always keep the product away from dust, liquids, and high humidity. These may damage internal
components or affect accuracy.
If laser radiation hits your eye, close your eyes and immediately turn your head away from the beam.
Do not position the laser beam so that it unintentionally blinds you or others.
Do not look into a laser beam using magnifying optical devices, such as binoculars or a telescope, as this
increases the level of eye injury.
If you use laser goggles to enhance the visibility of the laser beam, please note that they do not protect your
eyes against laser radiation.
Do not remove or deface warning labels on the product.
Do not disassemble the product. Laser radiation can cause serious eye injury.
When not in use, turn off the power, engage the pendulum lock, and place the product in its carrying pouch.
Make sure that the pendulum lock mechanism is engaged before transporting the product.
NOTE: If the pendulum lock mechanism is not engaged before transportation, internal mechanical damage
may occur.
Do not use aggressive cleaning agents or solutions. Use only a clean, soft cloth for cleaning.
Avoid heavy impact to or dropping of the product. The accuracy of the product should be checked before use
if it has been dropped or subjected to other mechanical stress.
Any repair required on the product should be performed only by authorised service personnel.
Do not operate the product in explosion hazardous areas or in aggressive environments.
If the product is not in use for a long period of time, remove the batteries from the battery compartment. This
will prevent the batteries from leaking and causing corrosion damage.
Flat batteries must not be disposed of with household waste. Care for the environment and
take them to the collection points provided in accordance with national or local regulations. The
product must not be disposed of with household waste. Dispose of the product appropriately in
accordance with the national regulations enforced in your country. Adhere to the national and
country specific regulations. Please contact your local authority or your dealer on how to dispose
of batteries properly.
Regulatory Compliance Mark (RCM). The product meets applicable regulatory requirements.
For sign-off review, sent 4 Aug 2023.
3
3
Advertisement
Table of Contents
