Table of Contents
Advertisement
6.
Slide the depth pointer so that the pointer indi-
cates "0" on the scale.
Fig.36
► 1. Depth pointer
Adjust the cutting depth by pulling up the stopper
7.
pole while pressing the feed button.
1
2
Fig.37
► 1. Stopper pole 2. Feed button
To perform fine adjustment of the cutting depth,
8.
turn the dial on the stopper pole so that it indicates "0".
1
Fig.38
► 1. Dial
9.
Turn the head of the stopper pole to obtain the
desired depth. To increase the depth, turn the head
counterclockwise. To decrease the depth, turn the
head clockwise. (The depth changes by 1 mm per one
revolution.)
1
1
Fig.39
► 1. Head of the stopper pole
10. Tighten the stopper pole fixing nut.
1
Fig.40
► 1. Fixing nut
Release the fixing lever.
11.
Fig.41
► 1. Fixing lever
By pushing down the tool until the stopper pole meets
the stopper screw, you can obtain the depth of cut which
you adjusted by above procedure.
15 ENGLISH
1
Advertisement
Table of Contents
