Table of Contents
Advertisement
Cleaning the tool
Clean the tool by wiping off dust, dirt, or cut off grass
with a dry cloth or one dipped in soapy water and wrung
out. If the cut off grass is adhered to the motor housing,
be sure to remove it.
1
Fig.27
► 1 . Motor housing
Storage
When storing the tool, raise the wire guard, shorten the
shaft, and then fold the loop handle.
Replacing the nylon cord
Use nylon cord with diameter specified in "SPECIFICATIONS" only. Never use heavier line,
WARNING:
metal wire, rope or the like. Use recommended nylon cord only, otherwise it may cause damage to the tool and
result in serious personal injury.
WARNING:
Make sure that the cover of the nylon cutting head is secured to the housing properly as
described below. Failure to properly secure the cover may cause the nylon cutting head to fly apart resulting in
serious personal injury.
CAUTION:
When installing or removing the nylon cord, be careful not to contact the nylon cord cutter
on the protector. Contact with the cutter may result in personal injury.
Fig.28
► 1 . Wire guard
Fig.29
► 1 . Loop handle 2. Shaft
15 ENGLISH
1
1
2
Advertisement
Table of Contents
