Makita DUR190L Instruction Manual
Cordless grass trimmer
Hide thumbs
Also See for DUR190L:
- Instruction manual (152 pages) ,
- Instruction manual (25 pages) ,
- Instruction manual (125 pages)
Related Manuals for Makita DUR190L
Summary of Contents for Makita DUR190L
- Page 1 INSTRUCTION MANUAL Cordless Grass Trimmer DUR190U DUR190L DUR191U DUR191L Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DUR190U DUR190L DUR191U DUR191L Type of handle Bike handle Loop handle Bike handle Loop handle No load speed 3: 6,000 min 2: 5,100 min 1: 3,500 min Overall length 1,775 mm (without cutting tool) Nylon cord diameter 2.0 - 2.4 mm... -
Page 3: General Power Tool Safety Warnings
Power tools can produce electromagnetic fields Only for EU countries Ni-MH (EMF) that are not harmful to the user. However, Do not dispose of electric equipment or battery Li-ion users of pacemakers and other similar medical pack together with household waste material! In observance of the European Directives, devices should contact the maker of their device and/ on Waste Electric and Electronic Equipment... -
Page 4: Intended Use
Power tool use and care Do not use a battery pack or tool that is dam- aged or modified. Damaged or modified batteries Do not force the power tool. Use the correct may exhibit unpredictable behaviour resulting in power tool for your application. The correct fire, explosion or risk of injury. -
Page 5: Personal Protective Equipment
Personal protective equipment Electrical and battery safety Do not expose the tool to rain or wet condi- tions. Water entering the tool will increase the risk of electric shock. Do not use the tool if the switch does not turn it on and off. -
Page 6: Cutting Tools
The cutting attachment continues to rotate for 21. Before starting the tool, be sure that the cut- a short period after turning the tool off. Don't ting tool is not touching the ground and other rush to contact the cutting attachment. obstacles such as a tree. - Page 7 To avoid kickback: Always wear protective gloves when handling the cutting blade. Apply the segment between 8 and 11 o'clock. Always clean dust and dirt off the tool. Never use gasoline, benzine, thinner, alcohol or the Never apply the segment between 12 and like for the purpose.
- Page 8 Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting causing fires, personal injury and damage. It will also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum battery life Charge the battery cartridge before completely discharged.
-
Page 9: Parts Description
PARTS DESCRIPTION DUR190L DUR191L DUR190U DUR191U Speed indicator ADT indicator Caution lamp Main power button (ADT = Automatic Torque Drive Technology) Reverse button Battery cartridge Lock-off lever Switch trigger Hanger Handle Barrier (country specific) Protector Lock lever Joint cover Shoulder harness (DUR191U and... -
Page 10: Functional Description
FUNCTIONAL Caution lamp Status Color Blinking DESCRIPTION Overload Overheat WARNING: Always be sure that the tool is switched off and the battery cartridge is removed Over discharge before adjusting or checking function on the tool. Failure to switch off and remove the battery cartridge Overload protection may result in serious personal injury from accidental start-up. If the tool gets into one of the following situation, the tool automatically stops and the caution lamp starts Installing or removing battery... -
Page 11: Main Power Switch
The battery may have malfunctioned. ► 1 . Lock-off lever 2. Switch trigger DUR190L and DUR191L NOTE: Depending on the conditions of use and the ambient temperature, the indication may differ slightly from the actual capacity. Main power switch Tap the main power button to turn on the tool. -
Page 12: Electric Brake
Speed indicator Mode Rotation speed NOTE: During the reverse rotation, the tool operates only for a short period of time and then automatically 3,500 - 6,000 min stops. NOTE: Once the tool is stopped, the rotation returns High 6,000 min to regular direction when you start the tool again. - Page 13 ► 1 . Lever Attaching the barrier Pull up the joint cover and insert the attachment For DUR190L and DUR191L (country specific) pipe while aligning the protrusion on the pipe (cutting If the barrier is included in your model, attach it to the tool side) with the concave portion of the joint part. handle using the screw on the barrier.
-
Page 14: Cutter Blade
Cutter blade To remove the pipe, turn the lever to the direction of the arrow shown in the figure and pull the pipe out while pressing down the lock lever. CAUTION: When handling a cutter blade, always wear gloves and put the blade cover on the blade. CAUTION: The cutter blade must be well pol- ished, and free of cracks or breakage. -
Page 15: Nylon Cutting Head
Plastic blade Put the clamp washer and cup onto the cutter blade. NOTICE: Be sure to use genuine Makita plastic While holding down the spindle lock button, blade. tighten the nut securely by the box wrench. While holding down the spindle lock button, place the plastic blade onto the spindle and tighten it securely by hand. - Page 16 Adjust the handle/hanger position so that the tool comes within the range as shown below. ► 1 . Hex socket head bolt 2. Hanger For DUR190L and DUR191L Loosen the hex socket head bolts on the handle. Move the handle to a comfortable working position and then tighten the bolts.
-
Page 17: Operation
When not in use, store the hex wrench as shown in the figure to keep it from being lost. DUR190U and DUR191U ► 1 . Hex wrench For DUR190L and DUR191L only ► 1 . Hook 2. Hanger DUR190L and DUR191L ► 1 . Handle 2. Hex wrench ► 1 . - Page 18 Pull out the strip release the tool from the shoulder Correct positioning and handling allow optimum control harness. and reduce the risk of injury caused by kickback. DUR190L and DUR191L DUR190U and DUR191U ► 1 . Buckle DUR190L and DUR191L Simply squeeze the sides of the buckle to release the tool from the shoulder harness.
-
Page 19: Maintenance
Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Replacing the nylon cord WARNING: Use only the nylon cord with diameter specified in this instruction manual. - Page 20 95-M10L 100 mm 80 mm 20 ENGLISH...
-
Page 21: Troubleshooting
► 1 . Arrow on the protector 2. Arrow on the blade TROUBLESHOOTING Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to dismantle the tool. Instead, ask Makita Authorized Service Centers, always using Makita replace- ment parts for repairs. State of abnormality Probable cause (malfunction) Remedy Motor does not run. -
Page 22: Optional Accessories
The use of any other accessory or attachment may result in serious personal injury. CAUTION: These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. - Page 24 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885790-927 www.makita.com 20191209...