D-Link DCS-6113 User Manual page 56

Configuration
Network storage: Select to send the media files to a network storage location
when a trigger is activated. Click Save to enable the setting, then click Close to exit
the page. When completed, the new server settings will automatically be displayed
on the Event Settings page.
Media Settings
Click Add Media to open the Media Settings page. On this page, you can specify
the type of media that will be sent when a trigger is activated. A total of 5 media
settings can be configured.
Media name: Enter a name for the media setting.
Media Type: There are three choices of media types available: Snapshot, Video Clip,
and System log. Select the item to display the detailed configuration options. You
can configure either one or all of them.
Snapshot: Select to send snapshots when a trigger is activated.
Source: Select to take snapshots from stream 1 ~ 4.
Send pre-event images: The camera has a buffer area. It temporarily holds data up
to a certain limit. Enter a number to decide how many images to capture before a
trigger is activated. Up to 7 images can be generated.
Send post-event images: Enter a number to decide how many images to capture
after a trigger is activated. Up to 7 images can be generated.
File name prefix: Enter the text that will be appended to the front of the file name.
Add date and time suffix to the file name: Select this option to add a date/time
suffix to the file name.
Click Save to enable the settings, then click Close to exit the page.
D-Link DCS-6112 /6113 / 6113V User Manual 56