D-Link DCS-6112 Quick Install Manual
Fixed dome network camera
Hide thumbs
Also See for DCS-6112:
- User manual (85 pages) ,
- Quick installation manual (69 pages) ,
- Quick install manual (13 pages)
Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for D-Link DCS-6112
Summary of Contents for D-Link DCS-6112
- Page 1 Quick Install Guide Fixed Dome Network Camera This document will guide you through the basic installation process for your new D-Link Network Camera. DCS-6112/DCS-6113 Documentation also available on CD and via the D-Link Website...
-
Page 2: Installation Steps
DCS-6112/DCS-6113 Quick Install Guide This installation guide provides basic instructions for installing the DCS-6112/DCS-6113 Network Camera on your network. For additional information about how to use the camera, please see the User Manual which is available on the CD include in this package or from the D-Link support website. -
Page 3: Hardware Overview
2. Hardware Overview Dome Cover Plastic housing D-Link DCS-6112/DCS-6113 Quick Install Guide... - Page 4 4: Ground (power) 5: Audio input 6: Ground (audio input) 7: Audio output 8: Ground (audio output) DC input / Video Output 1: Ground (Video out) 2: Video output 3: Ground (DC input) 4: DC 12V input D-Link DCS-6112/DCS-6113 Quick Install Guide...
-
Page 5: Hardware Installation
5. The camera can be mounted with the cable routed through the ceiling, wall or from the side. 6. Insert the provided screws through the holes. Use a screwdriver to tighten and secure. D-Link DCS-6112/DCS-6113 Quick Install Guide... - Page 6 Connection with a PoE Switch If using a PoE switch or router, connect the network camera to the switch or router via an Ethernet cable, which will provide both power and data transmission over a single cable. D-Link DCS-6112/DCS-6113 Quick Install Guide...
-
Page 7: Configuration With Wizard
Insert the DCS-6112/DCS-6113 CD into your computer's CD-ROM drive to begin the installation. If the autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click Start > Run. Type D:\autorun.exe, where D: represents the drive letter of your CD-ROM drive. - Page 8 Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE The Setup Wizard will appear and display the MAC address and IP address of your camera(s). If you have a DHCP server on your network, a valid IP Address will be displayed.
-
Page 9: Viewing Camera Via Web Browser
Viewing Camera via Web Browser Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu. Start > D-Link > Setup Wizard SE Select the camera and click the button labeled "Link" to access the web configuration. -
Page 10: Adjust The Viewing Angle
3. Attach the dome cover to the camera as shown below. The dome cover cannot be attached if the angle does not fit. 4. Finally, make sure all parts of the camera are installed securely. D-Link DCS-6112/DCS-6113 Quick Install Guide... - Page 11 Notes D-Link DCS-6112/DCS-6113 Quick Install Guide...
-
Page 12: Technical Support
Copyright ©2011 D-Link Corporation/D-Link Systems, Inc. All rights reserved. D-Link and the D-Link logo are registered trademarks of D-Link Corporation or its subsidiaries in the United States and other countries. Other trademarks are the property of their respective owners. Product specifications, size and shape are subject to change without notice, and actual product appearance...