Cisco 8800 Series Quick Start Manual page 2

Make a call with a headset
1. Plug in a headset.
2. Enter a number using the keypad.
3. Press Headset
.
Make a call with the speakerphone
1. Enter a number using the keypad.
2. Press Speakerphone .
Mute your audio
1. Press Mute .
2. Press Mute again to turn mute off.
Stop your video
(Cisco IP Phone 8845, 8865, and 8865NR only.)
1. Turn the camera shutter counterclockwise to
stop your video.
2. Turn the camera shutter clockwise to start
your video.
Listen to your voice messages
Press Messages
and follow the voice prompts.
To check messages for a specific line, press the
line button first.
Forward all calls
1. Select a line and press Forward all.
2. Dial the number that you want to forward to,
or press Voicemail.
3. To receive calls again, press Forward off.
cbts.com
| onx.ca 009200814
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to
this URL: www.cisco.com/go/trademarks. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a
partnership relationship between Cisco and any other company. (1110R)
Adjust the volume in a call
Press Volume
left or right to adjust
the handset, headset, or speakerphone volume
when the phone is in use.
Adjust the ringtone volume
Press Volume
left or right to adjust
the ringer volume when the phone is not in use.
Change the ringtone
1. Press Applications .
2. Select Settings > Ringtone.
3. Select a line.
4. Scroll through the list of ringtones and press
Play to hear a sample.
5. Press Set and Apply to save a selection.
Adjust the screen brightness
1. Press Applications
.
2. Select Settings > Brightness.
3. Press the Navigation cluster left to decrease,
or right to increase, the brightness.
4. Press Save.
Change the font size
1. Press Applications .
2. Select Settings > Font Size.
3. Select a font size.
4. Press Save.
Pair a Mobile Device
(Cisco IP Phone 8851, 8861, and 8865 only.)
1. Put your mobile device in discoverable mode.
2. On your IP Phone, press Applications
3. Select Bluetooth > Add Bluetooth.
4. Select your mobile device from the available
devices list to pair.
5. Verify the passkey on your mobile device and your
IP Phone.
6. When you are prompted to save mobile contacts,
choose to make your mobile device contacts and
call history available on your IP Phone.
Voicemail Setup
1. Press the Messages key
2. Enter the default pin - 246800#
3. Follow Prompts
• Set new pin (at least 6 digits)
• Record name
• Record standard greeting
User Guide
View the full User Guide at http://www.cisco.com/c/
en/us/support/collaboration-endpoints/unified-ip-
phone-8800-series/products-user-guide-list.html.
.
2