Panasonic SC-BT100 Operating Instructions Manual page 6

ST P2Basic connections
o Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit. oTurn off all equipment before connection and read the appropriate operating instructions.
Speaker cables and transmitter connection
O Speaker cable for surround Q Speaker cable for center 0 Digital transmitter
Preparation
• Attach the speaker cable stickers to make connection
easier.
e.g., Center speaker
_) sticker__ _
Speaker cable
(included)
• Set the surround selector at the rear of the wireless
system to its center.
Do Do not
RQT9129
m
Subwoofer
Connect to the terminals of the
same color.
Wireless system
• iii iiiiiiiiiill
Speaker cables (included)
Surround !
Front speaker (L) speaker (L) speaker(R)
= Do not use a front speaker as a surround speaker or vice versa. Verify the type of speaker with the label on the rear of the
speaker.
NOTE
• Do not insert or remove the digital transmitter while the main unit is on.
• Insert the wires fully.
-- 4-
: White
: Blue
• Be careful not to cross (short-circuit) or reverse the polarity of the speaker wires as doing so may damage the speakers.