Panasonic SC-BT100 Operating Instructions Manual page 11

Main unit
Place your finger on the • section
open it diagonally downwards.
[] POWER button (POWER (b/I) (_ 14)
Press to switch the unit from on to standby mode or vice-versa. In
standby mode, the unit is still consuming a small amount of power.
[] Standby/on indicator (_)
When the unit is connected to the household AC outlet, this
indicator lights up in standby mode and goes out when the unit is
turned on.
[] Open or close the disc tray (=_ 14)
[] SW BOOST (Subwoofer boost) button
Turn Subwoofer boost on/off (=_ 26)
[] SW BOOST (Subwoofer boost) indicator
Lights when Subwoofer boost is on (=_26)
[] 7.1CH D.S.R indicator
Illuminated during 7. lch source playback.
[] Select the source
BD/DVD/CD_ SD_ FM_AM_IPOD_D-IN_AUX
¢' I
The unit's display
[] Select the radio station manually (_ 18)
Search/Slow-motion/Skip (_ 15)
Search: Press and hold (During play)
Slow-motion: Press and hold (During pause)
Skip: Press
[] Stop (=_ 16)
[] Start play (=_ 14)
[] Disc tray (_ 14)
[] Remote control signal sensor
[] Display
[] Adjust the volume of the main unit (_ 14)
[] Volume indicator
• It is possible to set the indicator to turn on/off. (_ 33, FL Display)
[] SD card slot (_ 14)
[] Connect iPod (=_ 20)
[] Headphone terminal (=_ 14)
Rear panel terminals (=_ 6-8, 35-36)
CAUTION
Do not place objects in front of the unit. The disc tray may collide with
objects when it is opened, and this may cause injury.
[] Drive indicat0r
Lights when disc is ready to play.
_ Lights when iPod is ready to play.
Lights when SD card is ready to play.
• The indicator blinks when reading data.
[] SLEEP indicator (_ 16)
[] Radi o broadcast displaY ......
_ Lights when receiving a radio broadcast (_ 16)
, _d_d_.
_i_, Lights when set to monaural reception (=_ 18)
Lights when set to stereo broadcast reception (=_ 18)
Flashes during preset channel registration (=_ 9)
[] Wireless link indicator
Lights when speaker setting (_ 33, Speaker, 34,
Speaker settings) is set to 5.1ch and link with wireless
system is activated
Lights when speaker setting (_ 33, Speaker, 34,
Speaker settings) is set to 7.1ch and link with wireless
system is activated
• The indicator blinks when the wireless link is inactive for a long time.
[] Main display section
[] iPod indicator
Illuminated during iPod repeat playback (EXTENDED
mode only, _ 21)
_ modellluminatedonly, =_during21) iPod shuffle playback (EXTENDED
[] Audio signal indicator ....
Lights when DTS decoder is being used.
Lights when DTS-HD decoder is being used.
_ Lights when DTS-ES decoder is being used.
_.i¢_,_: Dghts when DTS 96/24 decoder is being used.
Lights when Dolby Digital decoder is being used.
_'_i_ ' _:_ used.Lights when Dolby Digital Plus decoder is being
Lights when Dolby Pro Logic 11decoder is being
used.
f_i_ _ Lights when Dolby Pro Logic [ix decoder is being
...... .... used.
_i_ Lights when Dolby TrueHD decoder is being
_,_,,_,_ used.
_ Lights when DTS NEO:6 matrix decoder is being
used.
RQT9129