Panasonic SC-BT100 Operating Instructions Manual page 34

Changing settings with the setup menu
Speaker settings
Center, surround and surround back speakers only)
Press [&, Y, <, I_] to select the speaker icon and press [OK].
Center
=Surround
= Surround back _1
Press [&, V] to select the setting and press [OK].
Icon examples:
Select when the center speaker is
._onnected and in use.
Center
Select when the center speaker is not
3onnected or not in use.
Select when the surround speakers are
._onnected and in use.
surround
Select when the surround speakers are
qot connected or not in use.
Surround
back_!
Select when
- using the optional Panasonic
wireless system SH-FX67 and
speaker system SB-HSl00A to
enjoy 7.1ch surround sound.
-connecting an amplifier to the
SURROUND BACK terminal at the
back of the main unit to enjoy 7.1 ch
surround sound.
Select when the surround back speakers
are not connected or not in use.
<_%urround back speakers are set to" "by default.
_2youcan select" "only when surround speakers are set to" ".
e.g.,
5.1ch speaker connection 7.1ch speaker connection
Changing the delay time
(Effective when playing multi-channel audio)
(Center, surround and surround back speakers only)
For optimum listening with 7.1/5.1-channel sound, all the speakers,
except for the subwoofer, should be the same distance from the
seating position. If you have to place the center, surround and
surround back speakers closer to the seating position, adjust the delay
time to make up for the difference.
If either distance (A_or (_ is less than @, find the difference in the
relevant table and change to the recommended setting.
5.1ch speaker connection 7.1ch speaker connection
Approximate room dimensions
Circle of constant primary listening distance
Actual speaker position
[_'__: Ideal speaker position
(_(_BS_: Primary listening distance
O Press [&, Y, _1, I_] to select the delay time box and press [OK].
I_ Press [&, V] to select the setting and press [OK].
Center
Surround
Surround back
(A_ Center speaker
Difference Setting
Approx. 34 cm (1 ft. 1 in,) 1.0 ms
Approx. 68 cm (2 ft. 2 in,) 2.0 ms
Approx. 102 cm (3 ft. 4 in.) 3.0 ms
Approx. 136 cm (4 ft. 5 in.) 4.0 ms
Approx. 170 cm (5 ft. 6 in.) 5.0 ms
(B_Surround/Surround back
speaKers
Difference Setting
Approx. 170 cm (5 ft. 6 in.) 5.0 ms
Approx. 340 crn (11 ft. 1 in.) 10.0 ms
Approx. 510 crn (16 ft. 8 in.) 15.0 ms
RQT9129
Adjusting speaker level
(Effective when playing multi-channel audio)
O Select "Test" and press [OK].
A test signal is output.
Front (L) _Center _ Front (R) _ Surround (RS)
t
Surround (LS)_ Surround back (LB) _ Surround back (RB)
I_ While listening to the test signal, press [&, _'] to adjust the volume
of each speaker.
Center speaker: (4-6 dB to -6 dB)
Surround and Surround back speakers: (+10 dB to -10 dB)
• Set each speaker level according to the volume of the Front (L)
and Front (R) speaker volume respectively.
1_1Press [OK].
The test signal stops.
• No signal is output for the subwoofer. To adjust its volume, see
page 26, Adjusting speaker level during play.
r====_ Center
Test =
Surround
(LS)
(RS)
Surround back (RB)
Surround back (LB)
• To finish the speaker setting
Press [&, Y, <, I_] to select "Complete" and press [OK].