Different Kinds Of Playback For Bd-Video - Panasonic SC-BT100 Operating Instructions Manual

Different kinds of playback for BD-Video
Some discs permit a variety of interactive functions in addition to the ordinary playback operation.
Showing Pop-up menu
0 Press [POP-UP MENU].
Press [&, T, _1, I_] to select the
item and press [OK].
The Pop-up menu is a special feature available with some BD-Video discs. This menu may vary with discs. For the operating method, refer to
the instructions for the disc.
e.g.,
1_ • Pop-up menu also appears by pressing
[SUB MENU] an d Selecting 'fP0p_up Menu,.
TIPS To exit the screen
ePress [POP_UP MENU].
• The Final Standard Profile [,Picture-impicture'!, "Virtual Package" (=_ below), etc.] is a new playback function of BD_Video. Contents of
playback and the operating method may vary with the disc. For details, refer to the instructions for the disc.
Playing secondary video (picture-in-picture) and
Secondary video can be played from a disc compatible with the picture-in-picture
function.
For the playback method, refer to the instructions for the disc.
Secondary video
To turn on/off secondary video
Press [PIP].
Secondary video is played.
• "PIP ON" is displayed.
• Press the button to turn it ON and OFR
To turn on/off audio with the secondary video
Press [SECONDARY AUDIO].
The secondary audio is played.
• "Secondary Audio ON" is displayed.
• Press the button to turn it ON and OFR
Primal _video
secondary audio
_ •Only the primary Video is played during Sea[ch/
S!°w:motion e[ frame:byfiame:
NOTE
Virtual package
For a disc compatible with the virtual package (_ 43), data is copied to other media
(_ 43, Local storage) from the disc to use the different functions while playing the
data.
For this unit, data is copied to an SD card.
The methods for copy and playback and the required available capacity on the card
may vary with the disc. For details, refer to the instructions for the disc.
To use the above functions, it is recommended that you format the card on this unit.
Format the card using the following procedures. BD-Video data, such as secondary
video recorded on the card, can also be erased with the following procedures.
Formatting SD cards/Deleting data
0 Insert an SD card (_ 14).
I_ Press [FUNCTIONS].
0 Press [&, T] to select "Other Functions" and press [OK].
O Press [&, T] to select "Card Management" and press
[OK].
O Press [&, T] to select "BD-Video .............. ....... i
O
O
t_ • f the SD card s removed from th s un t when
Using data that was Copied with the virtua!
NI'ITE package function, disc playback stops.
Images and audio may freez e mornentar!ly
during playback.
• Data cannot be copied in the following cases.
-The card is protected.
Available Capacity on the card is too small.
Delete unnecessary data or use a new card.
• When the function fails to work properly, even if
the data is copied, format the car d again with this
uniL (In this case, al! data will be erased.)
l'_ • If an SD card with files in different formats is
used, images and audio may not play back
TIPS properly. It is recommended that you use an SD
card with no data or an SD card formatted on this
unit.
Data Erase" or "Format SD Card"
and press [OK].
Press [,4, I_] to select "Yes" and
press [OK].
Press [,4, I_] to select "Start" and
press [OK].
t_ •It is impossible to resto[e data after formatting
_ the Card Or erasing the datal
NOTE Once a card is formatted, all data including those
recorded on the PC s erased as we , even f the
o, _ ,_, _o _ i data were protected with other equipment.
_!!! " t _il Confirm whether the Card Can be formatted.
RQT9129