Panasonic SC-BT100 Operating Instructions Manual page 29

Easy control only with VIERA remote control
If you connect this unit to a TV that has "HDAVl Control 2" or "HDAVl Control 3" function with an HDMI cable, you can operate this unit using the
following buttons on the TV remote control.
[A, Y, _1, I_], [OK], [RETURN], [SUB MENU] and colored buttons
Use the remote control for this unit to operate any other buttons (numbered buttons, etc.) that are not listed above.
• Refer to the TV operating instructions for operating TV.
Using the FUNCTIONS menu to operate this unit
By using the TV remote control, you can play media using the
FUNCTIONS menu.
O Press the button for VIERA Link
on the TV remote control.
O Select the home theater.
oThe FUNCTIONS menu is displayed
O Select the desired items on the
FUNCTIONS menu (=_ 25).
e.g.,
Using the sub menu to operate this unit
By using the TV remote control, you can play discs using the "Control
Panel" and display the Top Menu (for BD-Video and DVDWideo) or
Pop-up Menu (for BD-Video).
oThis works only during "BD/DVD" or "SD" playback and resume
modes.
O Press [SUB MENU].
• You cannot use the sub menu while the
Top Menu for BD-Video or DVD-Video is
displayed.
e.g,,
O
Select an item, then press [OK].
Control Panel Control Panel is displayed.
Follow the indications on the
screen (_ below).
Screen Aspect (_ 16)
Top Menu _ _ _ Top menu is displayed,
Menu _ Menu is displayed.
Pop-up Menu _ _ Pop-up menu is displayed.
Rotate Right _ Rotate the still picture.
Rotate Left
Zoom in _ Enlarge or shrink the still
Zoom out _ picture.
• Using the Control Panel
You can operate the playback with the indicated controls.
e.g.,
• Depending on the menu, some button operations cannot be
performed from the TV's remote control.
=You cannot input numbers with the numbered buttons on the TV's
remote control ([0] to [9]). Use this unit's remote control to select the
playlist etc.
• When you want to leave the TV on and set only this unit to standby mode
Press [_] on this unit's remote control and set to standby mode.
• When not using "HDAVI Control"
Set "VIERA Link" in the Setup menu to "Off". (=_33)
RQT9129