Main Code D3; Main Code D4; Main Code D5 - Sony PWS-4500 Service Manual

2-2-10.

Main Code D3

When an error was detected while writing to the internal memory, one of the following errors occurs.
Main Sub code Sub code
code (1) (2)
D3 01 ss
D3 02 ss
D3 03 ss
D3 04 ss
2-2-11.

Main Code D4

When an error was detected while reading from the internal memory, the following error occurs.
Main Sub code Sub code
code (1) (2)
D4 01 ss
D4 03 ss
D4 04 ss
2-2-12.

Main Code D5

When an error was detected on communication with the internal memory, one of the following errors occurs.
Main Sub code Sub code
code (1) (2)
D5 01 ss
PWS-4500
Error message Description
SLOT Mx AV WRITE A recording error of video and audio that originated in
ERROR1 the interface was detected in the internal memory.
•
•
SLOT Mx AV WRITE A recording error of video and audio that originated in
ERROR2 the memory was detected in the internal memory.
•
•
SLOT Mx DATA WRITE A recording error of MetaData that originated in the
ERROR1 interface was detected in the internal memory.
•
•
SLOT Mx DATA WRITE A recording error of MetaData that originated in the
ERROR2 memory was detected in the internal memory.
•
•
Error message Description
SLOT Mx AV READ ER- A playback error of video and audio that originated in
ROR1 the interface was detected in the internal memory.
•
•
•
SLOT Mx DATA READ A playback error of MetaData that originated in the in-
ERROR1 terface was detected in the internal memory.
•
•
SLOT Mx DATA READ A playback error of MetaData that originated in the
ERROR2 memory was detected in the internal memory.
•
•
Error message Description
SLOT Mx INTERFACE Communication with the internal memory is impossi-
ERROR1 ble. This internal memory cannot be used as it is. When
the error occurs each time the power is turned on and
the same error recurs even after power is turned off and
on, the unit or the internal memory may be defective.
•
•
•
Probable cause: IC400 on MEC-40 board
Protected operation: None
Probable cause: MDC-21 board
Protected operation: None
Probable cause: IC400 on MEC-40 board
Protected operation: None
Probable cause: MDC-21 board
Protected operation: None
Probable cause 1: IC400 on MEC-40 board
Probable cause 2: MDC-21 board
Protected operation: None
Probable cause: IC400 on MEC-40 board
Protected operation: None
Probable cause: MDC-21 board
Protected operation: None
Probable cause 1: IC400 on MEC-40 board
Probable cause 2: MDC-21 board
Protected operation: The unit does not take any
new action.
Continued
2-11