Table of Contents
Advertisement
4-5-5.
DIO Fan
Note
There are two DC fans (50 square, sirocco) on the DIO-101 board. They are attached in a similar way.
Preparation
1.
Refer to
"4-2. Flow
Chart".
Procedure
1.
Remove the tape (13 x 50).
2.
Open the two wire saddles.
3.
Disconnect the fan harness from the connector on the DIO-101 board.
4.
Remove the two screws to detach the DIO fan (DC fan (50 square, sirocco)).
Tape (13 x 50)
Fan harness
Wire saddles
DIO-101 board
PWS-4500
PSW2 x 6
DC fan (50 square, sirocco)
Connector
4-14
Advertisement
Table of Contents
