Error Code List - Sony csm-20s Operating Instructions Manual

Error Code List

ERROR CODE
ASC ASCQ
00 00 NO ADDITIONAL SENSE INFORMATION
There is no sense key to be reported.
02 00 NO SEEK COMPLETE
The picker assembly element was not carried to
the specified position (Timeout in shipping).
04 01 LOGICAL UNIT IS IN PROCESS OF
BECOMING READY
The unit is not ready (The mechanical part is
now working).
NOT READY, OPERATOR USING FRONT
04 80
PANEL
A user is now using the operation panel.
MECHANICAL POSITIONING ERROR
15 01
An error occurred in the picker assembly
element because top-and-bottom position was
improperly searched.
MECHANICAL POSITIONING LIMIT ERROR
15 80
The limit of the bottom position with the picker
assembly element has been detected.
15 81 MECHANICAL POSITIONING UNKNOWN
ERROR
An error occurred in the top-and-bottom
position with the picker assembly element.
1A 00 PARAMETER LIST LENGTH ERROR
Improper length of parameter list has been
detected when a data writing command was
issued by the initiator.
20 00 INVALID COMMAND OPERATION CODE
Detected that a command with unsupported
operation code was issued by the initiator.
21 01 INVALID ELEMENT ADDRESS
An improper element address has been
detected during the command operation issued
by the initiator.
24 00 INVALID FIELD IN CDB
An improper command field has been detected
during the command operation issued by the
initiator.
LOGICAL UNIT NOT SUPPORTED
25 00
An unsupported LUN has been detected in a
confirmation message or CDB.
INVALID FIELD IN PARAMETER LIST
26 00
An invalid parameter has been detected in the
parameter list.
When an error occurred in the S-AIT library, the Error/Warning LED lights in
orange. When an error occurred, check the error code appeared on the LCD
panel and then recover from the condition based on the list below. Afterwards,
turn off the power and then turn on the power again. When you turn on the
power yet the library is not initialized or an error still occurs after the
initialization, contact the Service and Support Center.
DESCRIPTION SENSE KEY
NO SENSE
HARDWARE Contact the Service and Support Center.
ERROR
NOT READY
NOT READY
HARDWARE Contact the Service and Support Center.
ERROR
HARDWARE Contact the Service and Support Center.
ERROR
HARDWARE Verify that the transport lock is detached
ERROR on the left side of the library.
ILLEGAL
REQUEST
ILLEGAL
REQUEST
ILLEGAL
REQUEST
ILLEGAL
REQUEST
ILLEGAL
REQUEST
ILLEGAL
REQUEST
To Recover
78
Appendix