Makita DT2010 Assembly Instructions Manual page 6

Included
1. Trolley with wheels
2. Tubular handle with dead-man switch
3. Tank support
4. Cutting depth limiter
5. Water tank with supply line
6. Fuel-tank Þ ller neck
7. Pressure water system incl. assembly instructions
8. Assembly instructions for guide trolley (not shown)
If one of the parts shown here is not included with delivery,
consult your dealer.
The Power Cut shown on the title is not in the scope of
delivery.
Do not perform the following assembly work without wearing
protective gloves!
Assembly
Mounting tank support and tubular handle
- Attach the tank support (3) and tubular handle (2) with the
star grip (7) (see image).
- Position the tank support (3) such that the water tank is upright
when working with the trolley.
Note: You can set the handle height as desired for comfortable
working after assembling the Power Cut.
6
1
4
2
3
6
7
7
2
5
3