Installing Tuning Machines - Grizzly T33955 Owner's Manual

Installing
Tuning Machines
The supplied tuning machines are easily installed.
Each tuning machine consists of the parts shown
in Figure 17.
Headstock
Tuning
Machine
Screw
Figure 17. Tuning machine components.
To install tuning machines:
Using a non-marring mallet, tap each of (6)
1.
machine seats and washers into pre-drilled
holes on front of headstock.
From back of headstock, slide posts through
2.
headstock and secure in seats (see Figure
17).
Note: Position tuning machine buttons away
from headstock.
-14-
Tuning Machine Seat
Tuning Machine
Washer
Tuning Machine Post
Tuning Machine
Button
Secure tuning machines to headstock with
3.
screws, as shown in Figure 18.
Note: Use a straightedge to make sure tun-
ers are aligned. Adjust if necessary.
Ensure
Tuners are
Aligned
x 6
Figure 18. Tuning machines installed and
aligned on headstock.
Model T33955 T33956 (Mfd. Since 09/23)