Page 1
Note: Do not drill the holes deeper than ⁄ " or you could drill through the top of the head- stock. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
Page 2
Neck (See Manual Page 10) Components Needed Step 1 Figure 3 Figure 4 Figure 2 Figure 4 Figure 2. Figure Note: You may want to cover the marking location with masking tape to avoid scratch- ing the finish.
Page 3
Step 7 FIgure 5 Figure 7 Figure 5 Pickup (See Manual Page 11) Figure 6 To install the pickup: Figure 8 Figure 6 Figure 7 Note: If the shaft angle is not shallow enough, you could drill through the back of the body. Figure 8.
Strap Button (See Manual Page 15) Components Needed To attach the strap to the guitar: Figure 19 Figure 17 Bridge (See Manual Page 14) To attach the bridge to the guitar body: Figure 18 Figure 19. String Retainers (See Manual Page Components Needed Figure 18.