Makita HW001G Instruction Manual page 15

Before operating the machine, remove the nozzle from
the trigger gun.
1.
Open the battery cover and install the battery
cartridges into the high pressure washer and then lock
the battery cover.
2
1
Fig.20
► 1. Battery cartridge 2. Battery cover
2. Connect one end of the high-pressure hose to
the trigger gun and the other end to the high pressure
washer.
3. Connect the high pressure washer and the faucet
using a water hose. After that, open the faucet.
Fig.21
NOTICE:
Before turning on the machine, make
sure that the faucet is fully open.
4. Select the desired mode by pressing the mode
switching button, and then turn the power switch clock-
wise to turn on the machine.
Fig.22
► 1. Power switch 2. Mode switching button
5. To eject a water jet, unlock the stopper and
squeeze the trigger. Once water is ejected stably from
the trigger gun, release the trigger and turn the machine
off.
Fig.23
► 1. Stopper
NOTE: Be sure to remove the nozzle from the trigger
gun before performing this operation.
15 ENGLISH
1
2
1