Makita HW001G Instruction Manual
Cordless high pressure washer
Hide thumbs
Also See for HW001G:
- Instruction manual (168 pages) ,
- Instruction manual (28 pages) ,
- Instruction manual (140 pages)
Related Manuals for Makita HW001G
Summary of Contents for Makita HW001G
- Page 1 INSTRUCTION MANUAL Cordless High Pressure Washer HW001G Read before use. Read before use.
- Page 2 WARNING Machines shall not be used by children. Children should be • supervised to ensure that they do not play with the machine. This machine is not intended for use by persons (including chil- • dren) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge.
- Page 3 According to EN12729 (BA), the appliance can also be con- nected to the mains drinking water supply if a backflow preventer valve with drain facility is installed in the supply hose. SPECIFICATIONS Model: HW001G Max. flow rate *1 7.0 L/min Water flow rate *2 Mode 3 (High mode) 5.5 L/min...
- Page 4 Work area safety Symbols Keep work area clean and well lit. Cluttered or dark areas invite accidents. The followings show the symbols which may be used Do not operate power tools in explosive atmo- for the equipment. Be sure that you understand their spheres, such as in the presence of flammable meaning before use.
- Page 5 Do not overreach. Keep proper footing and Keep cutting tools sharp and clean. Properly balance at all times. This enables better control maintained cutting tools with sharp cutting edges of the power tool in unexpected situations. are less likely to bind and are easier to control. Dress properly.
- Page 6 This machine is not intended for use by per- IMPORTANT SAFETY WARNINGS sons (including children) with reduced physi- cal, sensory, or mental capabilities, or lack of WARNING: experience and knowledge. Read all safety warnings and all instructions. Failure to follow the warnings and Children should be supervised to ensure that instructions may result in electric shock, fire and/or they do not play with the appliance.
- Page 7 24. Depending on the application, shielded noz- Follow all charging instructions and do not zles can be used for high pressure cleaning, charge the battery pack or tool outside the which will reduce the emission of hydrous temperature range specified in the instruc- aerosols dramatically.
- Page 8 Avoid storing battery cartridge in a con- causing fires, personal injury and damage. It will tainer with other metal objects such as also void the Makita warranty for the Makita tool and nails, coins, etc. charger. Do not expose battery cartridge to water or rain.
- Page 9 To install the battery cartridge; Battery check button Pull up the locking lever, and then open the battery cover. You can check the remaining battery capacity by press- ing the battery check button. Fig.1 Fig.3 ► 1. Battery cover 2. Locking lever ►...
- Page 10 Let the machine and battery(ies) cool down. 50% to 75% If no improvement can be found by restoring protection system, then contact your local Makita Service Center. 25% to 50% NOTICE: If the machine stops due to a cause...
- Page 11 Vario spray nozzle and extension Power switch Country specific WARNING: Always turn off the main power CAUTION: Install only the vario spray noz- switch when not in use. zle to the extension. Do not connect the other optional extensions to the original extension. NOTICE: Do not turn the power switch forcibly.
- Page 12 Trigger operation Attaching the trigger gun NOTICE: To avoid mechanical error in the pres- CAUTION: Make sure that the high-pressure sure switch, always leave a two-second interval hose is securely connected. A loose connection between trigger operations. may blow the high-pressure hose off, resulting in a personal injury.
- Page 13 NOTE: The hose assembly ships with coupling NOTICE: When attaching the water hose con- sleeves attached to both ends. When connecting to a nector and coupling sleeve, attach them securely. faucet without a coupling sleeve, remove the coupling Otherwise, the water hose connector or coupling sleeve at one end by turning the coupling sleeve in sleeve may come off when you open the faucet.
- Page 14 OPERATION NOTE: When using the foam nozzle, the detergent in the bottle is diluted with the water supplied by the machine and sprayed. You do not have to dilute the concentration of detergent in the bottle more than WARNING: Do not touch the water jet or necessary.
- Page 15 Before operating the machine, remove the nozzle from Select the desired mode by pressing the mode the trigger gun. switching button, and then turn the power switch clock- wise to turn on the machine. Open the battery cover and install the battery cartridges into the high pressure washer and then lock the battery cover.
- Page 16 Once water is ejected stably from NOTICE: the trigger gun, release the trigger. Always use Makita's hose assembly and strainer assembly. NOTICE: Always keep 1.0 m or less in height between the inlet of the high pressure washer and the water surface.
- Page 17 Turn off the machine and attach the nozzle to Strainer assembly the trigger gun for your purpose, and then turn on the machine to start the washing operation. NOTE: When water is not ejected, detach the hose assembly and strainer assembly and soak them in water.
- Page 18 Discoloration, deformation or cracks may result. To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized or Factory Service Centers, always using Makita replacement parts. Fig.33 Carrying the machine ►...
- Page 19 You can also carry the machine using the wheels of Cleaning the nozzle machine. Be sure to extend the handle by pressing the lock-off button before carrying the machine. NOTICE: Do not remove dirt or debris forcibly. This may result in personal injury or damage to the ejection hole causing deviated jet angles or poor performance.
- Page 20 Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt to disassemble the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs.
- Page 21 The use of any other accessories or attachments might present a risk of injury to per- sons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. •...
-
Page 22: Table Of Contents
Combinations of nozzles and hoses Fig.44 Splash guard Cyclone jet nozzle *1 Vario spray nozzle *1 Extension *1 Foam nozzle Wash brush Vario spray lance Variable nozzle Rotating brush Under body spray lance Pipe cleaning hose (10 m) Pipe cleaning hose (15 m) Connecting joint Trigger gun *1 Lance extension *2... -
Page 23: Splash Guard
Splash guard Wash brush Fig.45 Fig.48 Reduces splash back when cleaning corners with the A nozzle equipped with a brush. Useful for washing out cyclone jet nozzle. dirt while scrubbing with brush. Vario spray lance CAUTION: When adjusting the jet pressure, do not rotate the nozzle while pulling it toward the trigger gun. -
Page 24: Variable Nozzle
Variable nozzle Under body spray lance CAUTION: CAUTION: When adjusting the jet width, do Do not use the under body spray not rotate the nozzle while pulling it toward the lance with the lance extension. trigger gun. The nozzle may come off from the trig- ger gun and cause a personal injury. -
Page 25: Extension High-Pressure Hose (5 M)
Swivel joint Some optional nozzles require the connecting joint (optional accessory) to attach to the trigger gun. Attach the connecting joint to the trigger gun in the same way as the nozzle. Fig.58 Prevents the high-pressure hose from being twisted. Fig.55 ►... - Page 26 Strainer assembly Fig.61 A strainer assembly to supply water from a tank or reservoir. Use the hose assembly to connect to the product. 26 ENGLISH...
- Page 28 Makita Corporation 3-11-8, Sumiyoshi-cho, Anjo, Aichi 446-8502 Japan 885A39-921 www.makita.com 20230612...