Table of Contents
Advertisement
HOW TO START
Starting the app for smartphones / tablets
1.
Before starting the app, install the battery cartridge and the tool to the connector.
NOTICE:
If the tool has any main power switch, turn it on. Otherwise you cannot change settings or check
status of the tool with the connector.
2.
Start the app.
3.
Confirm the tutorial and "Terms of use".
The tutorial and terms of use are shown only when starting the app for the first time.
NOTE: You can check the tutorials and terms of use at any time from "Menu".
Connection settings
1.
For the first time, "How to connect" screen is displayed automatically after confirming the terms of use.
2.
Tap "Search the connectable device".
When connecting for the first time, bring your smartphone / tablet closer to the connector about 10 cm to 30 cm.
3.
Choose the connector you want to connect.
When the connection is completed, the "Connected" message is displayed on the main screen.
From the second time onwards, or if you want to reconnect the tool for such a reason you have failed to connect, you
can reconnect from
(link icon) on the upper right of the screen.
NOTE: If the connection is unsuccessful, for example, the connection is cut off in the middle, close the app once
and re-install the battery cartridge to the connector. After that, start the app again.
NOTE: Connectors for which the initial settings have been completed will be connected automatically from the
next time onwards.
NOTE: You cannot connect the connector to the smartphone / tablet with Bluetooth connection while the connector
is connected to the PC with USB connection. In this case, once disconnect the USB connection and then connect
the connector with Bluetooth.
4 ENGLISH
Advertisement
Table of Contents
