Table of Contents
Advertisement
2.
Fill in your configuration details to activate the product / battery matching function.
Smartphone / tablet
(a)
(b)
(c)
a)
Enter the new PIN code.
•
For smartphones / tablets, you may be required to enter the current PIN at this time.
NOTICE: Set the PIN code for both tool and battery other than "0000". Otherwise the product / battery matching
function cannot be available.
NOTE: The default PIN code of all tools and battery cartridges are "0000".
b)
Place a check mark to the device you want to set the product / battery matching function in "Target device"
section.
c)
Toggle on "Product / battery matching" in "Use function" section.
3.
Register settings.
•
For smartphones / tablets, tap "Done".
•
For PCs, click "OK" and then you may be required to enter the current PIN at this time. After the current PIN
code is confirmed, click "Done" in the "PIN setting" field.
NOTE: If the PIN that you entered does not match the PIN already registered in the tool or battery, you will be
asked to enter it again.
After you enter wrong PIN 5 times in a row, you will be blocked from entering the PIN for 5 minutes.
(a)
(b)
(c)
10 ENGLISH
PC
Advertisement
Table of Contents
