Table of Contents
Advertisement
Switching to "Comm Mode"
1.
Select "Comm Mode" in the "Operation mode" screen.
Smartphone / tablet
2.
Select "Done".
The message "The settings have been written." will appear in the main screen after the switching operation has been
completed.
NOTE: If you have already been selecting the "Comm Mode", the "Done" button is deactivated.
3.
If you continue to edit the tool / battery settings, connect the tool / battery to the connector.
Edit the tool / battery settings using the appropriate functions in the main screen. When you edit the setting of the
tool / battery, the contents of the tool / battery are changed each time.
NOTE: Updated information is not saved in the connector.
PC
27 ENGLISH
Advertisement
Table of Contents
