Table of Contents
Advertisement
—
New PIN
Enter the PIN that you are going to overwrite the current PIN.
Battery timer
b)
You can set the expiration time / date.
The current PIN is required when setting the battery timer. If the current PIN does not match the PIN of the battery to
be connected, the battery timer cannot execute.
c)
Note
You can take a note.
NOTE: For details on each setting, refer to the corresponding chapter above.
NOTE: The current PIN of the target device is also required for PIN setting and battery timer setting.
5.
Confirm settings.
•
For smartphones / tablets, tap "Done".
•
For PCs, click "OK".
6.
Save the settings on the connector.
•
For smartphones / tablets, tap "Done".
When saving is completed, the message "The settings have been written." is displayed on the main screen.
•
For PCs, click "Done".
When saving is completed, the message "Registration contents writing completed" is displayed on the main screen.
Click "OK".
*
The settings are not registered to the connected battery. The settings have been written to the connector.
Smartphone / tablet
7.
Make sure the mode lamp on the connector lights up in either red or green. (Red is for the tool / product, and
green is for battery cartridge.)
8.
End the connection.
•
For smartphones / tablets, tap "Disconnect" icon.
•
For PCs, disconnect the connector from the USB cable.
25 ENGLISH
PC
Advertisement
Table of Contents
