Makita ADP12 Instruction Manual page 23

4. Fill in your configuration details.
If you choose the tool / product as the target device, you can set one of the following settings:
Smartphone / tablet
(a) (a) (a)
PIN setting
a)
You can set the new PIN code.
— Current PIN
Enter the PIN that is already registered to the tool / product to be connected.
NOTE: Enter "0000" if the PIN code have not been registered to the tool / product to be connected.
NOTE: If the current PIN is different from the PIN of the tool / product to be connected, you cannot set the new PIN to
the tool / product.
New PIN
—
Enter the PIN that you are going to overwrite the current PIN.
b) Note
You can take a note.
(a)
(b) (b) (b)
(b)
23 ENGLISH
PC