Load Paper In The Paper Tray - Brother HL-B2180DW Online User's Manual

Home > Paper Handling

Load Paper in the Paper Tray

• If, when the Check Paper setting is set to On and you pull the paper tray out of the machine, a message
appears on the LCD asking if you want to change the paper size and paper type, change these settings, if
needed, following the LCD instructions.
• When you load a different size and type of paper in the tray, you must also change the Paper Size and
Paper Type settings on the machine, or on your computer.
1. Pull the paper tray completely out of the machine.
2. Press and slide the paper guides to fit the paper.
Press the green release levers to slide the paper guides.
3. Fan the stack of paper well.
4. Load paper in the paper tray with the printing surface face down.
5. Make sure the paper is below the maximum paper mark (b b b).
Overfilling the paper tray will cause paper jams.
6. Slowly push the paper tray completely into the machine.
7. Lift the support flap to prevent paper from sliding off the output tray.
> Load Paper > Load Paper in the Paper Tray
20