Cisco Small Business Pro SPA500S Quick Start Manual page 2

Hide thumbs Also See for Small Business Pro SPA500S:

AUTION

Do not plug a telephone line cord into the AUX port. Use only the auxiliary

cable provided with the SPA500S.

Locate the AUX IN port on the back of the SPA500S. Connect

Step 8

one end of the auxiliary cable to this port.

Step 9 Locate the AUX port on the back of the SPA500 Series IP Phone.

Connect the other end of the auxiliary cable to this port. The

SPA500S is powered by the auxiliary cable with the SPA500

Series IP Phone; no additional power source is required.

Step 10

Route the auxiliary cable inside the cable slot of the SPA500S.

Attach the appropriate desktop stand to each unit.

Step 11

Connecting a S econd S PA500S

A maximum of two SPA500S attendant consoles can be connected to a

SPA500 Series IP Phone. The instructions in this section are for

connecting a second SPA500S. If you are not attaching a second

SPA500S, skip to Section 3, Configuring the SPA500S.

Step 1 Attach the first SPA500S to the IP phone and connect the

auxiliary cable as described in Section 1, Connecting to the

SPA500 Series IP Phone.

Step 2 Align the left screw hole in the first SPA500S with one of the

holes on the attachment arm.

Step 3 Insert the pegs on the attachment arm into the peg holes on the

SPA500S.