Cisco SPA500 Series Manual

Configure ring type

Hide thumbs Also See for SPA500 Series:

Download this manual

Configure Ring Type on SPA500 and SPA300

Series

Objectives

The SPA500 and SPA300 IP phone allows you to change the ring type (or ring tone) from a

list of tones already included in the phone. This document explains how to change the ring

type on the SPA500 and SPA300.

Applicable Devices

• SPA500 Series

• SPA300 Series

Configure Ring Types

Step 1. Press the Setup button to open the Setup menu.

Step 2. Navigate to Settings and press Select using the soft-key.

Step 3. Navigate to Ring Type and press Select using the soft-key.

Step 4. Press Select to display the ring type options.

Page 1 This document explains how to change the ring type on the SPA500 and SPA300. Applicable Devices • SPA500 Series • SPA300 Series Configure Ring Types Step 1. Press the Setup button to open the Setup menu.
Page 2 Step 5. Navigate through the different ring types and press Play to listen to various tones. Step 6. Once you have found the desired tone, press Select using the soft-key to set it as your ring type. Step 7. Press Default using the soft-key to make the selected ring type your default ring type.

Spa300 series