GE D400 Substation Data Manager User Manual page 46

GE Energy
4.2 Cabling Overview
The D400 provides a series of I/O adapter cards for connecting cables and wiring from
substation devices and network interfaces. All physical connections are made to easily
accessible connectors on the rear panel of the D400.
D400 Field and Network Connections
Serial Communication Slots
The types of communication cards included in your D400 depend on what was ordered
for your substation application.
For a list and detailed description of the types of communication cards available, see
chapter "3 Setting up Communication Cards".
General Cabling Requirements
Cabling required to make physical connections to the D400 are as follows:
Media
Single Fiber Optic
Ethernet
Single Twisted Pair
Redundant Twisted Pair
PPP Serial Over External
Modem V.90 (56 Kbps)
46
994-0089–1.00–2, General
IRIG-B Distribution Slot
IRIG-B Input Slot
Designation
10BaseFL 62.5/125 µm or
50/125 µm multi-mode
100BaseSX
fiber cable
10/100BaseT UTP– Unshielded Twisted
Pair – CAT 5 or better
10/100BaseT UTP– Unshielded Twisted
Pair – CAT 5 or better
RS-232 Standard RS-232 cable
Get other manuals https://www.bkmanuals.com
Network Slots
USB KVM Slot
External Power Source
Power Supply Alarms
Cabling Connector
ST Connectors
(820-850 nm)
RJ-45
RJ-45
DB-9