GE D400 Substation Data Manager User Manual page 20

GE Energy
2.2 Required Tools
Before beginning the installation procedures, have the following tools and equipment
available:
•
Ethernet cable(s)
•
Flathead screwdriver with 0.6 mm by 3.5 mm blade (for terminal block wiring)
•
Flathead screwdriver with 0.3 mm by 2.5 mm blade (for removing and installing the
adapter cards and changing switch positions)
•
#1 Phillip screwdriver (for power terminal block wiring and adapter card removal)
•
#2 Phillip screwdriver (for rack mounting the unit)
•
Needle-nose pliers
•
Wire cutters
•
Wire strippers
•
Wire-crimping tool (Panduit
•
6 fork connectors, Panduit part number PV14-6F for 14-16 AWG wire or PV18-6F for
18-22 AWG wire (or equivalent) for terminal block connections
•
1 ring connector, Panduit part number PV10-14R for 12 AWG wire (or equivalent) for
protective earth terminal
•
Approved network settings for the device (default IP-Address: 192.168.168.81; default
Subnet Mask: 255.255.255.0)
•
Windows-based PC with HyperTerminal
software) installed
20
994-0089–1.00–2, General
CT-1525 or equivalent)
®
(or any Windows-based terminal emulation
®
Get other manuals https://www.bkmanuals.com