Router Led Behavior - NETGEAR MR90 User Manual

Figure 1. Router front and back views
1. Router LED
2. Sync button
3. Reset button
4. Ethernet ports
5. Internet port
6. Power connector

Router LED behavior

The following table describes the LED behavior for the LED that is on the front of the
router.
Table 1. Router LED behavior
LED color Description
Blinking white The router LED blinks white for one of the following reasons:
• You connected the power adapter to the router. Now the router is booting and
• You pressed the Sync button and the router is attempting to sync with the satellite.
• You pressed the Reset button and the router is resetting to its factory default settings.
Solid blue The router finished booting, is connected to the Internet, and is working normally. The
LED stays lit solid blue when the satellite is working normally.
Solid amber The router is unable to connect to the Internet.
Blinking amber The router's firmware is corrupted.
-
Overview
Nighthawk Tri-band Mesh WiFi 6E
attempting to sync with the satellite.
10 User Manual