Enable Openvpn Service In The Router - NETGEAR MR90 User Manual

Enable OpenVPN service in the router

You must enable the OpenVPN service settings in the router before you can use a VPN
connection.
To enable OpenVPN service:
1. Launch a web browser from a computer or mobile device that is connected to your
mesh network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VPN Service.
The VPN Service page displays.
NOTE: The OpenVPN configuration software packages that you can
download on the page are for the VPN client devices (see Install OpenVPN
software on a VPN client on page 129).
5. Select the Enable VPN Service check box.
We recommend that you use the default TUN mode and TAP mode settings. (These
settings determine how VPN information is transferred.) If you know that you need
other settings, you can change the TUN mode and TAP mode settings, but you must
do so before you download and install the OpenVPN configuration software packages
on client devices (see Install OpenVPN software on a VPN client on page 129).
6. To change the TUN mode settings, do the following:
• To change the TUN mode service type, select the UDP or TCP radio button.
The default protocol for TUN mode is UDP.
• To change the TUN mode service port, type the port number that you want to
use in the field.
Use OpenVPN to Access Your
Network
Nighthawk Tri-band Mesh WiFi 6E
128 User Manual