Manually Update Router Firmware - NETGEAR MR90 User Manual

A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Administration > Router Update > Manual Update.
The Router Update page displays.
5. In the satellite section, and select your satellite.
The satellite's Router Update page opens.
NOTE: If you have more than one satellite, only update one satellite at a
time. You must wait for the first satellite to finish updating before updating
the next satellite.
6. Click the Browse button.
7. Locate and select the satellite firmware file that you downloaded.
The firmware file name ends in .img or .chk.
8. Click the Upload button.
The firmware on your satellite is updated.
It takes a few minutes to complete the process.
9. After satellite finishes updating, on the satellite web interface, select Status and
double-check the firmware version on the Status page.

Manually update router firmware

We recommend that you update your satellite's firmware before you update the router's
firmware.
WARNING: Make sure that your satellite is ready updating its firmware before
updating your router's firmware.
Manage your Router and
Satellite
Nighthawk Tri-band Mesh WiFi 6E
104 User Manual