Lan Ip Addressing In Vpn Networks - NETGEAR MR90 User Manual

The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > VPN Service.
The VPN Service page displays.
6. Make sure that the Enable VPN Service check box is selected.
For more information about the VPN configuration for the router, see Enable
OpenVPN service in the router on page 128.
7. Click the For Smart Phone button to download the router's OpenVPN configuration
files to your computer or Android device.
If you download the configuration files to your computer, unzip the files, and send
them your Android device.
8. On your Android device, open the .ovpn file and import it into the OpenVPN Connect
app.
You can now open a VPN tunnel to the router.
For more information about using OpenVPN on your Android device, visit
https://www.vpngate.net/en/howto_openvpn.aspx#android.

LAN IP addressing in VPN networks

For the VPN connection to work, your computer or device (the VPN client) must be
connected to a network that uses a different LAN IP address scheme than your router.
The default LAN IP address scheme for the router is 192.168.1.x. (The most common IP
schemes are 192.168.x.x, 172.x.x.x, and 10.x.x.x.) If you experience a conflict, change
the IP scheme either for your home network or for the network where your VPN client
device is connected.
If both networks use the same LAN IP scheme, when the VPN tunnel is established, you
cannot access your home router or your home network with the OpenVPN software.
For information about changing the LAN settings on the router, see Change the LAN
IP address settings on page 82.
Use OpenVPN to Access Your
Network
Nighthawk Tri-band Mesh WiFi 6E
134 User Manual