Pci Board - NEC Bull NovaScale R620 User Manual

PCI BOARD

Up to three PCI boards can be installed to the CPU/IO module. The R620-MR model is used in the example quoted here.
However steps you should take are the same for other models.
IMPORTANT:
The PCI board is extremely sensitive to static electricity. Make sure to touch the metal frame of the server to
discharge static electricity from your body before handling the PCI board. Do not touch the PCI board terminals or
onboard parts by a bare hand or place the PCI board directly on the desk. For more information on static electricity,
see "ANTI-STATIC MEASURES" on page 8-3.
Make sure to read "ANTI-STATIC MEASURES" and "PREPARING YOUR SYSTEM FOR UPGRADE" before
starting installing or removing options.
Note the following to install or replace PCI board.
To make a dual PCI board configuration, install the same type of board (i.e., having the same specifications and
performance) to the same slot in another group.
When a PCI board is installed to one group, another identical PCI board should be installed to the same slot in
another group. This rule is applied to the case of removal.
Install the PCI boards, starting from the one with the smallest number.
List of option PCI boards and installable slots:
Product name
PCI slot performance
Slot size
PCI board type
Mountable board size
1000BASE-T 1ch board set
1000BASE-SX 1ch board set
1000BASE-T 2ch board set
SCSI board
Fibre Channel board set
NovaScale R620 User Guide
PCI#3
(PCI#2 for
R620-LR)
320Fb-MR
PCI-1 PCI-2 PCI-3
64bit/100MHz
Low Profile
3.3V
MD2
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
○ ○ ○
PCI#2
(PCI#1 for R620-LR)
PCI#1
(cannot be mounted on
R620-LR)
Remarks
Only one board can be mounted when
1000BASE-T 2ch board or Fibre
Channel board is installed
Up to one board can be mounted per
CPU/IO module
8-31