Installing 3.5-Inch Hard Disk Drive - NEC Bull NovaScale R620 User Manual

Installing 3.5-inch Hard Disk Drive

Follow the procedure below to install the hard disk. A hard disk may be installed in another slot in the same procedure.
IMPORTANT:
Make sure to read "ANTI-STATIC MEASURES" and "PREPARING YOUR SYSTEM FOR UPGRADE" before
starting installing or removing options.
1.
Click [Start] - [Administrative Tools] - [Computer Management]. The [Computer Management] window appears.
2.
Click [Disk Management] under [Storage] in the console tree.
3.
Unlock the front bezel with the security key and detach it.
4.
Identify the slot to which you want to install the hard disk.
Install a hard disk in an empty slot in the group, starting from the lower slot. (In the order of slot 0, slot 3, slot 1, slot
4, slot 2, and slot 5)
5.
Hold the handle of the dummy tray to remove the tray.
IMPORTANT:
Keep and store the dummy tray with care.
6.
Unlock the hard disk to be added.
7.
Firmly hold the handle of the hard disk to install and insert the hard disk into the
slot.
TIPS:
Insert the disk until the lever hook touches the server frame.
Check the orientation of lever. Insert the hard disk with the lever unlocked.
8.
Slowly close the lever.
When the lever is locked, you will hear a click.
IMPORTANT:
Be careful not to pinch your finger(s) between the lever and handle.
TIPS:
Check the hook of the lever is engaged with the frame.
9.
Connect the power cord.
NovaScale R620 User Guide
8-6