Setup Of Optional Pci Board - NEC EXP320R Maintenance Manual

Chapter 2 Configuring and Upgrading the System

5.7.5 Setup of Optional PCI Board

(1)
N8804-012 1000BASE-T 2ch board set

Slots to install optional PCI cards
Refer to "List of option PCI cards and installable slots" in 5.7.1 Precautions in this Chapter

Driver installation procedure
For Express5800/ft series, use two option PCI cards in a pair to make dual configuration.
You do not need to install drivers for N8804-012 board because they are included in the OS. After installing
the boards, refer to 3. Duplex LAN Configuration in this Chapter.
(2)
N8804-011 10GBASE-T 1ch board set

Slots to install optional PCI cards
Refer to "List of option PCI cards and installable slots" in 5.7.1 Precautions in this Chapter.

Driver installation procedure
For Express5800/ft series, use two option PCI cards in a pair to make dual configuration.
You do not need to install drivers for N8804-011 board because they are included in the OS. After installing
the boards, refer to 3. Duplex LAN Configuration in this Chapter..
(3)
N8803-040/040F Fibre Channel 1ch Board Set or N8803-040AF Fibre Channel 1ch Board
Set

Slots to install optional PCI cards
Refer to "List of option PCI cards and installable slots" in 5.7.1 Precautions in this Chapter.

Driver installation procedure
For Express5800/ft series, use two option PCI cards in a pair to make dual configuration.
You do not need to install drivers for N8803-040/040F board or N8803-040AF board because they are
included in the OS.
Express5800/R320e-E4, R320e-M4, R320f-E4, R320f-M4 Maintenance Guide (VMware)
146
The identical PCI cards must be installed to the slots with the same number in
Important
CPU/IO module 0 and CPU/IO module 1 when you enable the fault tolerant feature for
the optional device.
For the supported connecting devices, contact your sales agent.
Important For LAN cable's connector, use a RJ-45 connector which is compliant with IEC8877
standard. If any other connector is used, it may not be removed easily.
Important For LAN cable's connector, use a RJ-45 connector which is compliant with IEC8877
standard. If any other connector is used, it may not be removed easily.
5. Installing and Replacing Optional Devices