Installing 3.5-Inch Hard Disk Drive - NEC NovaScale R630 User Manual

Installing 3.5-inch Hard Disk Drive

Follow the procedure below to install the hard disk. A hard disk may be installed in another slot in the same procedure.
IMPORTANT:
Make sure to read "ANTI-STATIC MEASURES" and "PREPARING YOUR SYSTEM FOR UPGRADE" before
starting installing or removing options.
Start Windows Server 2003 after installing two hard disk drives that make up of disk dual configuration.
1.
Shut down Windows Server 2003. The system turns off automatically.
2.
Remove the front bezel.
3.
Identify the slot to which you want to install the hard disk drive.
Install a hard disk in an empty slot in the group, starting from the lower slot. (In the order of slot 1, slot 2, and slot
3 in CPU/IO module 0 and 1)
4.
Pull the lever toward you while pushing the green lock of the dummy
tray to the left.
5.
Hold the handle of the dummy tray to remove the tray.
IMPORTANT:
Keep and store the dummy tray with care.
TIPS:
The lever on the slot 3 may be hard to pull toward you.
This does not become a problem for proper operation.
6.
Unlock the hard disk to be added.
7.
Firmly hold the handle of the hard disk to install and insert the hard
disk into the slot.
TIPS:
Insert the disk until the lever hook touches the server frame.
Check the orientation of lever. Insert the hard disk with the
lever unlocked.
8-6