Connecting A Digital Tv Receiver - Sony WEGA KLV-15SR1 Operating Instructions Manual

Connecting a Digital TV Receiver

Digital TV Set-top box
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box's Y, P and P
B
the VIDEO 2 IN connections.
Note
This TV supports only the 480i signal format. If the TV receives a signal other than 480i,
"Non Supported Video Format" appears on the screen.
2
Using an AUDIO cable, connect the Digital TV Set-top box's AUDIO
OUT jacks to the TV's AUDIO IN jacks.
Note
The Y, P and P jacks do not provide audio, so audio cables must be connected to
B R
provide sound.
Rear of TV
VHF/UHF R-AUDIO-L VIDEO S VIDEO
VIDEO 1 IN
AUDIO-R (red)
AUDIO-L (white)
RK-74A (not supplied)
Installing and Connecting the TV
jacks to the Y, P and P
R B
R-AUDIO-L Y P P R L
B R
VIDEO 2 IN AUDIO OUT
P
R
P
B
Y
VMC-10HG (not supplied)
jacks on the TV. Use
R
DC IN 16.5V
19