Connecting A Dvd Player With A/V Connectors - Sony WEGA KLV-15SR1 Operating Instructions Manual

Connecting a DVD Player with A/V Connectors

Use this hookup if:
• Your DVD player does not have component (Y, P
Tip
If your DVD player has component video output connectors, for best picture quality, use the
connection described on page 16.
Disconnect all power sources before making any connections.
1
Using an AUDIO cable, connect the DVD player's AUDIO OUT jacks to
the TV's AUDIO IN jacks.
2
Using an S VIDEO cable, connect the DVD player's S VIDEO jack to
the TV's S VIDEO jack.
Rear of TV
VHF/UHF R-AUDIO-L VIDEO
VIDEO 1 IN
AUDIO-R (red)
AUDIO-L (white)
RK-74A
(not supplied)
DVD player
Note
To watch the pictures input from the S VIDEO input jack, set "Auto YC" to "On" in the
(Setup) menu (See page 12).
Tips
• To take advantage of the Wide Screen Modes, set the TV's aspect ratio to 16:9 on your
DVD player. For details, refer to the operating instructions supplied with your DVD player.
• Use TV/VIDEO on the remote control to switch to the DVD player input.
• If your DVD player is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of
the S VIDEO cable.
Installing and Connecting the TV
S VIDEO R-AUDIO-L Y P P R
B R
VIDEO 2 IN AUDIO OUT
S VIDEO
YC-15V/30V
(not supplied)
, P ) jacks.
B R
L DC IN 16.5V
17