Connecting A Digital Satellite Receiver - Sony WEGA KLV-15SR1 Operating Instructions Manual

Installing and Connecting the TV

Connecting a Digital Satellite Receiver

Digital Satellite Receiver
(SAT-HD200)
OPTICAL
AUDIO
OUT
OPTICAL
18
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital
Satellite Receiver's Y, P
TV. Use the VIDEO 2 IN connections.
Note
This TV supports only the 480i signal format. If the TV receives a signal other than 480i,
"Non Supported Video Format" appears on the screen.
2
Using an AUDIO cable, connect the Digital Satellite Receiver's AUDIO
OUT jacks to the TV's AUDIO IN jacks.
Note
The Y, P and P
B
provide sound.
Rear of TV
VHF/UHF R-AUDIO-L
AUDIO-R (red)
AUDIO-L (white)
VIDEO OUT VIDEO OUT
(480i) (1080i/720p/480p)
1 2
Y
L1 L2 P B
TYPE
P
R
R1 R2
S. VIDEO
AUDIO OUT
RK-74A (not supplied)
and P jacks to the Y, P
B R
jacks do not provide audio, so audio cables must be connected to
R
VIDEO S VIDEO R-AUDIO-L Y P P
B
VIDEO 1 IN VIDEO 2 IN
and P jacks on the
B R
R L DC IN 16.5V
R
AUDIO OUT
P
R
P
B
Y
VMC-10HG (not supplied)