Connecting A Digital Tv Receiver - Sony KLV-15SR1 Operating Instructions Manual

hnsta_[ ng and Conneo[ingtheIV
Connecting a Digital TV Receiver
Disconnect all power sources before making any connections.
1
Using three separate component video cables, connect the Digital TV
Set-top box's Y, P_ and P_ jacks to the Y, P_3 and PR jacks on the TV. Use
the VIDEO 2 IN connections.
Note
This TV supports only the 480i signal format. If the TV receives a signal other than 480i,
"Non Supported Video Format" appears on the screen.
2 Using an AUD10 cable, connect the Digital TV Set-top box's AUDIO
OUT jacks to the TV's AUDIO IN jacks.
Note
The Y, P_ and P_ jacks do not provide audio, so audio cables must be connected to
provide sound.
Rear of TV
Digital TV Set-top box
[not supplied)
2
RK-74A (not supplied)
19