Functional Description - Makita 7104L Instruction Manual

FUNCTIONAL DESCRIPTION

CAUTION:
• Always be sure that the tool is switched off and
unplugged before adjusting or checking function
on the tool.
Adjusting depth of cut
1
► 1. Wing bolt 2. Stopper pole 3. Stopper
Loosen the wing bolt on the stopper. Move the stopper
to the desired position and tighten the wing bolt. When
tightened, the tip of the wing bolts should contact the
flat surface of the stopper pole. The numbers indicated
on the stopper pole are in cm units (3 mm (1/8") per
graduation).
Switch action
1
► 1. Hole for padlock 2. Switch trigger
CAUTION:
• Before plugging in the tool, always check to see
that the switch trigger actuates properly and
returns to the "OFF" position when released.
To start the tool, simply pull the switch trigger. Release
the switch trigger to stop.
A hole is provided in the handle for insertion of a pad-
lock to lock the tool off.
WARNING:
• Do not use a lock with a shank or cable any
smaller than 2.5 mm(0.1") in daimeter.
2
3
2
ASSEMBLY
CAUTION:
• Always be sure that the tool is switched off and
unplugged before carrying out any work on the
tool.
Installing or removing cutter chain
1
2
3
► 1. Adjusting screw 2. Hex bolt 3. Chain bar 4. Chain
cover
WARNING:
• Always be sure that the tool is switched off and
unplugged before installing or removing the
cutter chain.
• Always close the chain cover after installing,
removing or adjusting the cutter chain.
To install the cutter chain, open the chain cover. Loosen
the hex bolt securing the chain bar and the adjusting
screw.
Orient the cutters in the direction of the arrow on the
tool (rotational direction). Attach the cutter chain to the
sprocket first and then to the chain bar. Semi-tighten the
hex bolt.
1
2
3
► 1. Arrow 2. Sprocket 3. Hex bolt
Turn the adjusting screw to increase the tension on the
cutter chain. Pull the middle of the cutter chain lightly.
When there is a clearance of approx. 5 - 6 mm (3/16"
- 1/4") between the chain bar and the cutter chain, the
tension on the cutter chain is adequate.
4 ENGLISH
4