Honeywell H18TFW User Manual page 7

08 Removing the handles
Remove the handle caps. Screw the handle fastening screws with an Allen key.
Remove the handle.
09 Fitting the handles
Remove the screws from the handles and fit them on the other side of the door.
Place the handle into the handle bolts and screw it tightly with the Allen key.
10 Fitting the accessories
Put the handle caps in, handle cover plate, hinge hole plug and middle beam pin in
place.
Plug the handle cap
Plug the handle
cover plate
5
Pin
Plug the hinge
shaft hole cap